The Aurora is a state of the art 315W Ceramic Metal Halide (CMH/CDM/LEC) grow light fixture. This is an integrated all-in-one fixture combining a Lumatek controllable electronic ballast, compact hammertone reflector and 315W CMH lamp.
The e-ballast has an option to be remotely controlled with a Lumatek digital control panel (sold separately) and is dimmable. When used with the controller the Aurora can be programmed with on/off times, simulated sunrise/sunset with a timed fade to and from full brightness and automatic dimming if grow room temperature parameters are exceeded.
The Aurora’s reliable 315W CMH digital ballast has been successfully used in cultivation facilities around the word and uses square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps.
For safety this ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression. Ballast has an LED indicator and is dimmable for optimum control.
The Aurora”s 315W CMH pulse-start lamp has been engineered for use with Lumatek 315W CMH electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.
CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. The Aurora is supplied with a Lumatek 315-930 (3100K Agro) Ceramic Metal Halide lamp which is also available in 4200K Daylight spectrum format (Lumatek 315-942).
The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.
The higher specification Lumatek Zeus 600W Pro LED is a linear multi-light bar fixture producing high PPF of 1620 µmol/s and a Photon Efficacy (fixture efficiency) of 2.7 µmol/J.
With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period.
The array of LEDs create a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents.
The Zeus is built using high quality Lumatek drivers and top bin LEDs from LUMLED and Osram generating a full-spectrum light source ideal for veg and flowering cycles.
For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with six LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.
The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller featuring automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.
Universal Control Systems Compatibility
Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.
Compared to regular open HPS/MH solutions the Zeus can achieve 30-40% less HVAC capacity. 100W Pro LED bar only to be used with compatible Zeus 600W Pro Driver/Fixture
Efficacy: 2.7 µmol/J
PPF: 1620 µmol/s
Input Voltage: 200-240V
Power Consumption: 600W
Footprint: 1.5×1.5m Waterproof: IP65
Lifetime: 60 000 Hrs
Light Distribution: 120°
Light Source: Osram & LUMLED
Diodes Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included) External
With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, cloning, vegetative and flowering growth periods of indoor-grown crops. The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 300W model producing 690 µmol/s PPF at 2.3 µmol/J efficacy and ideal for a 1m2 grow area.
Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.
Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.