Led

Showing all 4 results

  • Attis 200W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, vegetative and flowering growth periods of indoor-grown crops.

    The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 200W model producing 460 µmol/s PPF at 2.3 µmol/J efficacy (fixture efficiency) and ideal for a 0,8 x 0,8 m grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

    Add to cart
  • Attis 300W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, cloning, vegetative and flowering growth periods of indoor-grown crops. The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 300W model producing 690 µmol/s PPF at 2.3 µmol/J efficacy and ideal for a 1m2 grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

     

    Read more
  • Lumatek Zeus Range 600W LED

    Specifikationer

    The Lumatek Zeus 600W LED is a linear multi-light bar fixture producing PPF of 1380 µmol/s and a Photon Efficacy (fixture efficiency) of 2.3 µmol/J. With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period.

    The array of LEDs create a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents.

    The Zeus is built using high quality Lumatek drivers and top bin LEDs from Osram and Lumileds Philips generating a full-spectrum light source ideal for veg and flowering cycles.

    For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with six LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

    The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller featuring automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

    Universal Control Systems Compatibility
    Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

    Compared to regular open HPS/MH solutions the Zeus can achieve 30-40% less HVAC capacity.

    100W Standard LED bar only to be used with compatible Zeus 600W Standard Driver/Fixture.

    Read more
  • ZEUS 600W Pro LED by Lumatek

    The higher specification Lumatek Zeus 600W Pro LED is a linear multi-light bar fixture producing high PPF of 1620 µmol/s and a Photon Efficacy (fixture efficiency) of 2.7 µmol/J.

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period.

    The array of LEDs create a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents.

    The Zeus is built using high quality Lumatek drivers and top bin LEDs from LUMLED and Osram generating a full-spectrum light source ideal for veg and flowering cycles.

    For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with six LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

    The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller featuring automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

    Universal Control Systems Compatibility
    Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

    Compared to regular open HPS/MH solutions the Zeus can achieve 30-40% less HVAC capacity. 100W Pro LED bar only to be used with compatible Zeus 600W Pro Driver/Fixture

    • Efficacy: 2.7 µmol/J
    • PPF: 1620 µmol/s
    • Input Voltage: 200-240V
    • Power Consumption: 600W
    • Footprint: 1.5×1.5m Waterproof: IP65
    • Lifetime: 60 000 Hrs
    • Light Distribution: 120°
    • Light Source: Osram & LUMLED
    • Diodes Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included) External
    • Control: With Lumatek Digital Panel
    • Weight: 13.5 Kg
    • Dimensions: 1091 x 1182.4 x 51.9 mm
    • Spectrum: Full Spectrum F
    • BTU (With Driver Attached): 2115 BTUs/h
    • BTU (With Driver Remote): 2047 BTUs/h

    Items Included:

    • 6 x Lumatek 100W Full-Spectrum Magnet Light Bars
    • 1 x Lumatek 600W Driver with Connecting Cables
    • 1 x LED Structure with Connecting Cables
    • 1 x 0-10V Light Dimmer + Velcro
    • 2 x Metal Cable Hangers
    • 1 x Manual

    Features

    • Very high efficacy 2.7 µmol/s/J
    • High PPF output for high intensity 1620 µmol/s
    • High quality Lumatek LED drivers
    • Top bin LEDs
    • Balanced full spectrum
    • External control with Lumatek Control Panel
    • Replaceable 100W magnet light bars
    • Fully Dimmable
    • User friendly Plug & Play Assembling
    • Detachable driver for remote use

    Manuals

    Read more
Wishlist 0
Open wishlist page Continue shopping