Category: Hps/Cmh Lamps

Hps/Cmh Lamps

Showing all 6 results

  • Lumatek came up with this reliable intelligent digital ballast that has been successfully used in cultivation facilities around the word. Using square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps this ballast offers a full-spectrum output with less power consumed, lower light temperature production, more umol (PAR) light and more UV-A & UV-B than traditional HID/HPS/MH fixtures. CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield.

    With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. The new addition of Control capability allows you to smartly monitor your room temperatures, light timing, automation, safety control and dimming. By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast.

    5 metres Control Link Cable included.

    • Output power 315W
    • Input Voltage 220-240V 50/60Hz
    • Input Current (Max) 1.40A
    • Input Power 334W
    • Power factor 0.98
    • Efficiency 95%
    • Voltage range 185 to 275V
    • THD <10%
    • Dimming 50%-60%-70%-80%-90%-100%
    • Lamp CCF <1.6
    • Operating frequency low frequency
    • Environment temperature for full load operation 40℃
    • Enclosure temperature rise (Δt) ) 30℃
    • Ballast IP rated IP20
    • Humidity 90%
    • Dimensions 245 x 114 x 81mm
    • Weight 2.5Kg

    EMI suppression certified Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification No audible noise, no flicker

    Certificates and Test Reports:

    Other:

    Add to cart
  • Pure Light – Dual 400W. High Pressure Sodium (HPS).

    • 2100K.
    • 220/240V.
    • 50/60hz.
    • E:40.
    • Approx. 56.000 lumen
    Add to cart
  • LUMii 600W electronic ballast.

    The ballast can be attenuated to 250W, 400W, 600W and BOOST (+ 10%)

    Power cable included. IEC included for reflector.

    • H: 58mm
    • W: 120mm
    • L: 287mm
    
    
    Add to cart
  • 220-240V Current Utopia 630W/600W Fixture designed to run CMH & HPS Lamps under a 97% reflective Hammertone Focal Reflector. Lumatek continues to innovate by introducing to you, the next generation of HID digital ballast technology for the horticultural grow lighting sector. The all-new Lumatek Utopia 630W/600W DE CMH/HPS controllable fixture uses the latest in microprocessor-controlled electronics, to power both high-voltage CMH and HPS grow lamps – which are the most efficient HID light source for horticulture farming – allowing for both possibilities without additional expense.

    Designed for use in climate-controlled grow rooms, tents & greenhouses, the Utopia is an integrated all in one fixture with a hybrid digital ballast linking to a double-ended (DE) lamp holder in a premium 97% reflective hammer-tone alanod aluminium focal reflector. The Utopia 630W/600W fixture/ballast can drive both high or low voltage 600W HPS and 630W CMH DE grow lamps. Reducing the need for different ballasts/fixtures for each light source and thus reducing cost and maximising efficiency and flexibility to all growers. Using our HID extension cable the Utopia fixtures ballast can also be disconnected from the reflector and used remotely for more flexibility.
    The Utopia controllable is also available as an individual remote digital ballast that can be used with the reflector of your choice and offers the same hybrid tech. The Utopia fixture is both manually dimmable and can be externally controlled using the Lumatek Control Panel for up to 400 fixtures per controller unit, with automated and temperature-controlled dimming and safety protection for even greater precision, assurance and control.

    It features three manual power settings at 80%-90%-100% with externally-controlled light intensity from 80% – 110% in 1% increments using a Lumatek control panel.

    • Input Voltage: 220-240V 50/60Hz
    • Power Consumption (at 100%): 660W
    • Input Current: 2.7 – 3.0A
    • Efficacy: 95%
    • Light Distribution: 140º
    • Lamps: 630W CMH DE 240V & 600W HPS DE 400V
    • Reflector: 97% reflective Alanod Hammertone Focal
    • Dimmable: 80%-90%-100%
    • Power Factor: >0.98
    • THD: <10%
    • External Control: With Lumatek Digital Panel
    • Dimensions: 712x251x108 mm
    • Weight: 4.35 Kg
    • Certificates: CE

    Manual & Spec Sheets

    Key features

    • High output and efficacy
    • Powers two different technologies: CMH & HPS
    • Designed for best performance with 600W HPS & 630W CMH Lamps
    • 97% reflective Hammertone Focal Reflector
    • Complete & Balanced Fixture
    • Detachable ballast for remote use
    • Plug & Play installation
    • Manually dimmable 80%-90%-100%
    • Externally-controllable with Lumatek Digital Panel
    • Lamps sold separately
    • 97% reflective Hammertone Wide Reflector also available
    Add to cart
Wishlist 0
Open wishlist page Continue shopping