Category: Lightning

Showing 1–9 of 21 results

  • 220-240V Current Utopia 630W/600W Fixture designed to run CMH & HPS Lamps under a 97% reflective Hammertone Focal Reflector. Lumatek continues to innovate by introducing to you, the next generation of HID digital ballast technology for the horticultural grow lighting sector. The all-new Lumatek Utopia 630W/600W DE CMH/HPS controllable fixture uses the latest in microprocessor-controlled electronics, to power both high-voltage CMH and HPS grow lamps – which are the most efficient HID light source for horticulture farming – allowing for both possibilities without additional expense.

    Designed for use in climate-controlled grow rooms, tents & greenhouses, the Utopia is an integrated all in one fixture with a hybrid digital ballast linking to a double-ended (DE) lamp holder in a premium 97% reflective hammer-tone alanod aluminium focal reflector. The Utopia 630W/600W fixture/ballast can drive both high or low voltage 600W HPS and 630W CMH DE grow lamps. Reducing the need for different ballasts/fixtures for each light source and thus reducing cost and maximising efficiency and flexibility to all growers. Using our HID extension cable the Utopia fixtures ballast can also be disconnected from the reflector and used remotely for more flexibility.
    The Utopia controllable is also available as an individual remote digital ballast that can be used with the reflector of your choice and offers the same hybrid tech. The Utopia fixture is both manually dimmable and can be externally controlled using the Lumatek Control Panel for up to 400 fixtures per controller unit, with automated and temperature-controlled dimming and safety protection for even greater precision, assurance and control.

    It features three manual power settings at 80%-90%-100% with externally-controlled light intensity from 80% – 110% in 1% increments using a Lumatek control panel.

    • Input Voltage: 220-240V 50/60Hz
    • Power Consumption (at 100%): 660W
    • Input Current: 2.7 – 3.0A
    • Efficacy: 95%
    • Light Distribution: 140º
    • Lamps: 630W CMH DE 240V & 600W HPS DE 400V
    • Reflector: 97% reflective Alanod Hammertone Focal
    • Dimmable: 80%-90%-100%
    • Power Factor: >0.98
    • THD: <10%
    • External Control: With Lumatek Digital Panel
    • Dimensions: 712x251x108 mm
    • Weight: 4.35 Kg
    • Certificates: CE

    Manual & Spec Sheets

    Key features

    • High output and efficacy
    • Powers two different technologies: CMH & HPS
    • Designed for best performance with 600W HPS & 630W CMH Lamps
    • 97% reflective Hammertone Focal Reflector
    • Complete & Balanced Fixture
    • Detachable ballast for remote use
    • Plug & Play installation
    • Manually dimmable 80%-90%-100%
    • Externally-controllable with Lumatek Digital Panel
    • Lamps sold separately
    • 97% reflective Hammertone Wide Reflector also available
    Add to cart
    • 600W analog ballast – for both HPS and MH
    • GIB 600W HPS F / S or Elektrox 600W HPS
    • Standard Reflector with E40

    *socket Cables are not included and must be installed yourself

    Add to cart
  • Standard reflector (50 x 40 cm) w / ceramic E40 socket, delivered together without cables. Fits all HPS and MH bulbs.

    Add to cart
    • 400W analog ballast – for both HPS and MH
    • GIB 400W HPS F / S or Elektrox 400W HPS
    • Standard Reflector with E40

    *socket Cables are not included and must be installed yourself

    Add to cart
    • 250W analog ballast – for both HPS and MH
    • GIB 250W HPS F / S or Elektrox 250W HPS
    • Standard Reflector with E40

    *socket Cables are not included and must be installed yourself

    Add to cart
  • Lumatek Zeus Range 600W LED

    Specifikationer

    The Lumatek Zeus 600W LED is a linear multi-light bar fixture producing PPF of 1380 µmol/s and a Photon Efficacy (fixture efficiency) of 2.3 µmol/J. With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period.

    The array of LEDs create a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents.

    The Zeus is built using high quality Lumatek drivers and top bin LEDs from Osram and Lumileds Philips generating a full-spectrum light source ideal for veg and flowering cycles.

    For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with six LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

    The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller featuring automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

    Universal Control Systems Compatibility
    Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

    Compared to regular open HPS/MH solutions the Zeus can achieve 30-40% less HVAC capacity.

    100W Standard LED bar only to be used with compatible Zeus 600W Standard Driver/Fixture.

    Add to cart
  • Attis 200W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, vegetative and flowering growth periods of indoor-grown crops.

    The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 200W model producing 460 µmol/s PPF at 2.3 µmol/J efficacy (fixture efficiency) and ideal for a 0,8 x 0,8 m grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

    Add to cart
  • Attis 300W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, cloning, vegetative and flowering growth periods of indoor-grown crops. The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 300W model producing 690 µmol/s PPF at 2.3 µmol/J efficacy and ideal for a 1m2 grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

     

    Add to cart
Fremvisning af sortiment:
Med henvisning til bekendtgørelse om forbud mod reklame, synlig anbringelse og fremvisning m.v. af elektroniske cigaretter og genopfyldningsbeholdere med og uden nikotin § 3, stk. 1, skal jeg venligst anmode om at få fremvist det samlede produktsortiment.