Category: Growshop

Growshop

Showing 1–36 of 155 results

  • This huge tray is the largest in our range with a depth of 12 cm and a massive internal capacity of 144 Litres. The tray features a series of shallow horizontal ridges on the internal base of the tray which aid drainage from plant pots.

    Equally useful as a commercial drip / spillage tray for oils and chemical storage. There are many potential other applications such as a sand pit for kids, a plant irrigation display tray for garden centres and a mixing tray for cement to name but a few. Trays of this size and strength are very hard to find.

    Made from recycled polypropylene.

    Size Check:

    • 120cm (47″) Long
    • 120cm (47″) Wide
    • 12cm (5″) High
    Read more
    • 250W analog ballast – for both HPS and MH
    • GIB 250W HPS F / S or Elektrox 250W HPS
    • Standard Reflector with E40

    *socket Cables are not included and must be installed yourself

    Add to cart
  • 2m cable with mains plug.

    Cable with plug for connecting devices (ballast, fan and many others) to the mains.

    Length 2 meters.

    Add to cart
  • Lumatek came up with this reliable intelligent digital ballast that has been successfully used in cultivation facilities around the word. Using square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps this ballast offers a full-spectrum output with less power consumed, lower light temperature production, more umol (PAR) light and more UV-A & UV-B than traditional HID/HPS/MH fixtures. CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield.

    With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. The new addition of Control capability allows you to smartly monitor your room temperatures, light timing, automation, safety control and dimming. By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast.

    5 metres Control Link Cable included.

    • Output power 315W
    • Input Voltage 220-240V 50/60Hz
    • Input Current (Max) 1.40A
    • Input Power 334W
    • Power factor 0.98
    • Efficiency 95%
    • Voltage range 185 to 275V
    • THD <10%
    • Dimming 50%-60%-70%-80%-90%-100%
    • Lamp CCF <1.6
    • Operating frequency low frequency
    • Environment temperature for full load operation 40℃
    • Enclosure temperature rise (Δt) ) 30℃
    • Ballast IP rated IP20
    • Humidity 90%
    • Dimensions 245 x 114 x 81mm
    • Weight 2.5Kg

    EMI suppression certified Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification No audible noise, no flicker

    Certificates and Test Reports:

    Other:

    Add to cart
  • Pure Light – Dual 400W. High Pressure Sodium (HPS).

    • 2100K.
    • 220/240V.
    • 50/60hz.
    • E:40.
    • Approx. 56.000 lumen
    Add to cart
    • 400W analog ballast – for both HPS and MH
    • GIB 400W HPS F / S or Elektrox 400W HPS
    • Standard Reflector with E40

    *socket Cables are not included and must be installed yourself

    Add to cart
    • 600W analog ballast – for both HPS and MH
    • GIB 600W HPS F / S or Elektrox 600W HPS
    • Standard Reflector with E40

    *socket Cables are not included and must be installed yourself

    Add to cart
  • This tray has a depth of 12 cm and an internal capacity of 32 Litres.

    The 60cm Square Tray features a series of shallow horizontal ridges on  the internal base of the tray which aid drainage from plant pots. Equally  useful as a commercial drip / spillage tray for oils and chemical  storage. There are many potential other applications such as a sand pit  for kids, a plant irrigation display tray for garden centres and a  mixing tray for cement to name but a few. Trays of this size and strength are very hard to find. Made from recycled polypropylene.

    Size Check:

    • 60cm (23.5″) Long
    • 60cm (23.5″) Wide
    • 12cm (5″) High
    Add to cart
  • This  tray is among the largest in our range with a depth of 12 cm and a large internal capacity of 76.8 Litres. The 80cm Square Tray features a series of shallow horizontal ridges on the internal base of the tray which aid drainage from plant pots. Equally useful as a commercial drip / spillage tray for oils and chemical storage. There are many potential other applications such as a sand pit for kids, a plant irrigation display tray for garden centres and a mixing tray for cement to name but a few. Trays of this size and strength are very hard to find. Made from recycled polypropylene.

    Size Check:

    • 80cm (31.5″) Long
    • 80cm (31.5″) Wide
    • 12cm (5″) High
    Add to cart
  • ACTI VERA has been designed to protect the immune system, increase metabolism and enhance nutrient absorption in all sorts of plants.

    Acti Vera is very versatile. It can be used indoors and out, on food crops,  plantations, perennials, and ornamental plants during the vegetative and  flowering phase to stimulate growing and blooming. Biobizz recommends a dose of 5ml of Acti·Vera per 1 litre of water for watering from a can or 1-2 ml per litre of water as a foliar spray.

    Nutrient Schedule

    Data Sheet

    Select options
  • Advanced HPS Kit

    The Advanced HPS KIT is compiled from high quality components to maximize the production and quality.

    Our Advanced HPS grow kit is designed for cultivation of 9 plants on the smaller area with powerful 400W Lumatek HPS light and contains all necessary things to start your indoor grow project. You can choose between the grow tent 100x100x200cm and 120x120x200cm.

    You will need only to refill the soil (100 liters), seeds and nutrients and you are ready to grow your own plants indoors.

    Simple setup, plug and grow.

    Kit Contains:

    Guarantee 2 years / (5 years for Lumatek Ballast)

    Add to cart
  • The Advanced LED KIT

    The Advanced LED KIT is compiled from high quality components to maximize the production and quality.

    Our Advanced LED grow kit is designed for cultivation of 9 plants on the smaller area with powerful 300W Lumatek LED light (replacement of 600W HPS) and contains all necessary things to start your indoor grow project. You can choose between the grow tent 100x100x200cm and 120x120x200cm.

    You will need only to refill the soil (100 liters), seeds and nutrients and you are ready to grow your own plants indoors.

    Simple setup, plug and grow.

    Kit Contains:

    Guarantee 2 years / (3 years for Lumatek LED)

    Add to cart
  • NutraBlast Agiros air freshener is a premium quality odour eliminator designed to rapidly deal with any unwanted odours in vehicles, living spaces and smoking areas.

    NutraBlast is a UK-based company that specializes in powerful, aerosol sprays that replace foul smells with a blast of fresh scented odour eliminator. Just a couple of blasts from a NutraBlast can is enough to completely wipe out stale smoke, smells of damp or cooking smells. A single blast will easily freshen up a car or small bedroom.

    Agiros is NutraBlast’s fresh scented spray that leaves rooms smelling like a blast of market-leading deodorant.

    NutraBlast is available now from PureSativa in 500ml cans in your choice of four amazing fragrances – Mandarini, Fresko, Lemonia and Agiros.

    • Scent Agiros
    • Volume 500ml
    • Width 6.5cm
    • Height 23cm
    • Colour Purple
    Add to cart
  • ALG*A*MIC comes to the rescue if they have suffered from overfeeding, deficiencies, diseases, or temperature fluctuations. It also ensures green leaves by stimulating chlorophyll absorption.

    Alg A Mic is a revitalising product that contains a low level of NPK (Nitrogen, Phosphorus and Potassium) – making it impossible to overdose. It can be added to every substrate during the flowering and growing period.

    Our advice is to measure a 1-4ml dose of Alg·A·Mic per 1 litre of  water, but follow our official Nutrient Schedule for the best results.

    Nutrient Schedule

    Data Sheet

     

    Select options
  • All·Mix literally does it all for you – creating the optimum environment for plants to flourish throughout the year.

    This heavily pre-fertilized substrate mixture emulates a rich outdoor  soil with a full micro active ecosystem. It’s been designed to have enough nutrient-fuelled power to sustain lush growth for a couple of weeks, without any need to add any extra fertilizer.

    When using All·Mix for the first time, moisten it with water and leave to stand for 36 hours. This gives the Pre·Mix active fertilizer and microorganisms inside the substrate a chance to start working their magic before the plants goes in.

    Keep the soil slightly warm at all times – if it’s too cool, the microbial activity slows down, which makes it more difficult for the plants to grow. You also want to allow the soil to dry out between each watering. Because, as the All·Mix substrate dries out, fresh air gets in, which helps the soil to breathe.

    Nutrient Schedule

    Data Sheet

    Select options
  • Aluflex 102mm, 127mm 152mm, box 10m

    • Formable and non-flammable Aluflex pipe with a diameter of 102 mm. Length 10 meters.
    • Compressed into a package with a height of 50 cm.
    • Non-flammable flexible ducts for air systems with lower output. The maximally flexible Aluflex
    • 102mm consists of a frame made of steel wire and aluminum foil.
    • Maximum air speed 20m / s, low pressure.
    • Ventilation ducts suitable for exhaust and air intake.
    • Diameter 102mm, package contains 10 meters Aluflex.
    Select options
  • Simple analog socket timer

    Analogl socket clocks are designed for regular switching on and off of electrical appliances. It is especially suitable for repeated and reliable control of devices, for example in your absence. They are suitable for fluorescent lamps, contactors, motors as well as thermometers, direct heaters, light bulbs, halogens, etc.

    Specifications:

    • Switching: phase
    • Power supply: 230V AC 50Hz
    • Max. relay load – resistive: 3500W
    • Max. relay load – inductive: 750W
    • Adjustable time: min. 15min., Max. 24h.
    Add to cart
  • Attis 200W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, vegetative and flowering growth periods of indoor-grown crops.

    The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 200W model producing 460 µmol/s PPF at 2.3 µmol/J efficacy (fixture efficiency) and ideal for a 0,8 x 0,8 m grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

    Add to cart
  • Attis 300W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, cloning, vegetative and flowering growth periods of indoor-grown crops. The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 300W model producing 690 µmol/s PPF at 2.3 µmol/J efficacy and ideal for a 1m2 grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

     

    Add to cart
  • The Aurora is a state of the art 315W Ceramic Metal Halide (CMH/CDM/LEC) grow light fixture. This is an integrated all-in-one fixture combining a Lumatek controllable electronic ballast, compact hammertone reflector and 315W CMH lamp.

    The e-ballast has an option to be remotely controlled with a Lumatek digital control panel (sold separately) and is dimmable. When used with the controller the Aurora can be programmed with on/off times, simulated sunrise/sunset with a timed fade to and from full brightness and automatic dimming if grow room temperature parameters are exceeded.

    The Aurora’s reliable 315W CMH digital ballast has been successfully used in cultivation facilities around the word and uses square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps.

    For safety this ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression. Ballast has an LED indicator and is dimmable for optimum control.

    The Aurora”s 315W CMH pulse-start lamp has been engineered for use with Lumatek 315W CMH electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.

    CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. The Aurora is supplied with a Lumatek 315-930 (3100K Agro) Ceramic Metal Halide lamp which is also available in 4200K Daylight spectrum format (Lumatek 315-942).

    The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.

    Specifications

    Certificate

    Electronic Dimmable Ballast for 315W CMH lamps

    • Voltage: 240V 50/60Hz
    • Input Current Max (A): 1.60A
    • Input power: 334W
    • Output power: 315W Power factor: >0.97
    • Efficiency: 92%
    • Voltage range: 185 to 275V
    • THD: <10%
    • CF: <1.6
    • Environment temperature for full load operation: 40℃
    • Enclosure temperature rise (Δt): 30℃
    • Ballast IP rated: IP20
    • Humidity: 90%
    • Operating frequency: low frequency square wave
    • No audible noise, no flicker
    • Full circuit protection; open/short circuit, over temperature, over/low voltage, end of lamp life/rectification
    • EMI suppression certified

    Lumatek 315W CMH (3100K) Grow Lamp

    • Power Voltage: 240V/50Hz
    • Lamp Power (W): 315
    • Lamp Current (A): 3.15
    • Rated Life (H): 14000
    • CCT(K): 3100K (Agro)
    • Initial Lumens (lm): 37000 (3100K)
    • Luminous Efficiency (lm/W): 118 (3100K)
    • PAR (micromols/sec): 650 (3100K)
    • Bulb: T38 Base: PGZX18
    Add to cart
  • Bamboo Stakes offer a lightweight design, but are strong and durable to help keep your plants in place. They offer a natural finish and can be used both indoors and outdoors.

    Available in 3ft, 4ft and 5 ft lengths.

    Select options
  • Basic HPS Kit

    The Basic HPS KIT is compiled from high quality components to maximize the production and quality.

    Our growing Kit Basic is designed for cultivation of 5 plants on the smaller area with powerful 400W Lumatek HPS light and contains all necessary things to start your indoor grow project. You can choose between the grow tent 80x80x180cm and 100x100x200cm.

    You will need only to refill the soil (50 liters), seeds and nutrients and you are ready to grow your own plants indoors.

    Simple setup, plug and grow.

    Kit Contains:

    Guarantee 2 years / (5 years for Lumatek Ballast)

    Add to cart
  • The Basic LED KIT

    The Basic LED KIT is compiled from high quality components to maximize the production and quality. Our growing Kit Basic is designed for cultivation of 5 plants on the smaller area with powerful 200W Lumatek LED light (replacement of 400W HPS) and contains all necessary things to start your indoor grow project. You can choose between the grow tent 80x80x180cm and 100x100x200cm. You will need only to refill the soil (50 liters), seeds and nutrients and you are ready to grow your own plants indoors. Simple setup, plug and grow.

    Kit Contains:

    Guarantee 2 years / (3 years for Lumatek LED)

    Add to cart
  • Aroma Boost is an amino-humic acid mixture with added bio-active sulfur and magnesium. Sulfur is the most important element found in aromatic molecules and together with the 20 different amino acids added to Aroma Boost and the fluoric and humic acid, result in the plant expressing its full fragrance potential and giving it taste.

    Select options
  • Bud Explosion is a classic pH neutral P-K booster, formulated from the best raw material and added 5% amino acid. Bud Explosion is a true winning form that ensures large heavy flower tops filled with crystals. Manage your grow massive and heavy flowers, try Bud Explosion.

    Select options
  • Part A, Power House is the basic fertilizer that provides all the macro-nutrients plants need. 2% amino acid has been added which boosts cell formation and increases the plant’s ability to absorb fertilizer. Used in combination with Part B (Calcium Plus).

    Select options
  • Part B, Calcium Plus is a calcium nitrate blend that seeks to ensure that the plant does not lack Calcium. An additional 2% amino acid is added which boosts Calcium uptake and cell formation. Used in combination with Part A (Power House)

    Select options
  • Take part in future plant production and try Root Explosion today. Watch your roots go crazy in collaboration with millions of highly efficient microorganisms. The various bacterial and fungal cultures found in Root Explosion establish a symbiosis along with the plant’s roots and increase the uptake of fertilizer, promote root production as well as strengthen the plant against drought and disease. Root Explosion Contains a blend of 5 highly effective bacterial cultures and 18 different endo & ecto mycorrhizal fungi, added to a Biostimulant complex consisting of humic acid, seaweed, vitamins, carbohydrates and amino acids.

    How to use: Root Explosion is used when sprouting seeds, making cuttings or repotting plants into larger pots. It can also be used to boost your homemade fertilizer tea.

    • Dosage for Soil / Coco: Germination of seeds add 2g per 1 L of soil or Coco.
    • Small pots for Cuttings production, mix 2-4g per 1 L Soil or Coco.
    • Repotting plants for larger pots, sprinkle 2-4g into the hole before repotting.
    • For further use, once every 14 days down water 2-4 g per plant.
    • Homemade fertilizer tea, add 2-4g per 1 L of water.

    How do I best use Root Explosion:

    When seeds have just sprouted or your cuttings have just taken root, they need to be repotted. This is where you mix Root Explosion with your soil or coco before putting it in the pots and the plants get into the soil or coco. Let the plants stand in the small pots for 1-2 weeks. During this period, the roots develop in collaboration with the 5 highly efficient bacterial cultures and 18 different endo & ecto mycorrhiza fungi. When you repot the plants into larger pots, bacteria and fungi move the culture over to the large pots. We recommend that you sprinkle 2-4 g into the hole that the plant should go into. Boost your homemade fertilizer tea with highly effective bacteria and endo-ecto mycorrhiza, by adding 2g per 1 L of water, the mixture should stand for a minimum of 24 hours before use .

    Root Explosion:

    • Organic carrier 89.5%
    • 18-Endo & Ekto Mykorrhiza 8.0%.*
    • Biostimulant complex 2.0%.
    • Highly efficient Soil Bacteria 0.5%.*

    *% is given in dry cell weight

    Select options
  • Stimulus, is a new generation Booster that activates the plant’s immune system and provides an increased S.A.R response (Systemic Acquired Resistance). Our beloved crystal-trichrome production is controlled in part by the plant’s own immune system and by increasing the plant’s S.A.R response, the production of crystals increases. Stimulus also contains Auxin complexes that stimulate and strengthen the plant’s roots. The phosphorus found in Stimulus is in lipid form which ensures full uptake and minimal precipitation and leaching of phosphorus in one’s medium.

    Select options
  • BIO BLOOM is 100% organic, complete liquid fertilizer, as its name suggests, is what you need. It contains the optimum blend of nitrogen, phosphorous and  potassium, along with enzymes and amino acids – all working together in perfect harmony with the substrate. Trace elements and hormones of vegetable origin have also been added to help create a strong-stemmed  and vigorous flowering plant.

    Bio·Bloom is an independently working fertilizer that can be used from the flowering period up to harvest.

    Biobizz recommends approximately 2-4ml of Bio·Bloom per litre of water. You can find concrete doses for each period in our official Nutrient Schedule.

    Nutrient Schedule

    Data Sheet

     

    Select options
  • Bio Clone gel is a 100% natural way to get your clones off to an  optimal start. Bio Clone optimises the environment for the root system. It creates a healthy microdiversity around the roots to guarantee that nothing will stop them from catching on and growing into a healthy specimen.

    Key benefits:

    • 100% organic
    • Non-hazardous
    • Activates soil life at micro level. Where it’s needed.
    • Environmentally friendly
    • NO hormones

    SAFETY SHEET

    Read more
  • BioBizz Grow You can apply this liquid growth fertilizer to most types of soil and substrate mixtures. It has 100% organic Dutch sugar beet extract at its  base – commonly known as vinasse.

    This by-product of turning sugar beets or sugar cane into sugar is created by a natural fermentation process. Starches in the sugar are then treated with enzymes to produce glucose that, along with other plant nutrients, help produce a rich food source for soil microbes, boosting their populations for a more productive soil.

    The natural sugars and potassium in Bio·Grow activate the bacterial flora in the substrate to guarantee you an ample harvest of deliciously sweet fruit. Bio·Grow is a complete fertilizer that can be used throughout the growing and flowering period.

    Start with it as soon as the first leaves appear to when the plant is 10 – 15 cms tall. Then keep using Bio·Grow until the end of the fruit production.

    Nutrients Schedule

    Data Sheet

    Select options
  • BIO HEAVEN It contains carefully selected biological stimulants, such as amino  acids – the basic building blocks for proteins and enzymes that are essential for the plant’s structure and metabolism.

    As a result, this specially formulated energy booster not only improves the effects and translocation of nutrients in all foliar sprays and fertiliser blends – but it also gets rid of toxins through boosting the plant’s anti-oxidant system and repairs chlorophyll production.

    Bio Heaven can be used during the entire growing and flowering period on every type of substrate, coco mix or hydroponic systems. When using All·Mix or  Light·Mix, the ideal dose is starting with 2ml and slowly increasing to 5ml per 1 litre of water. Follow our official Nutrient Schedule for the best results.

    Nutrient Schedule

    Data Sheet

    Select options
Wishlist 0
Open wishlist page Continue shopping