Category: LUMATEK

LUMATEK

Showing all 10 results

  • Lumatek came up with this reliable intelligent digital ballast that has been successfully used in cultivation facilities around the word. Using square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps this ballast offers a full-spectrum output with less power consumed, lower light temperature production, more umol (PAR) light and more UV-A & UV-B than traditional HID/HPS/MH fixtures. CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield.

    With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. The new addition of Control capability allows you to smartly monitor your room temperatures, light timing, automation, safety control and dimming. By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast.

    5 metres Control Link Cable included.

    • Output power 315W
    • Input Voltage 220-240V 50/60Hz
    • Input Current (Max) 1.40A
    • Input Power 334W
    • Power factor 0.98
    • Efficiency 95%
    • Voltage range 185 to 275V
    • THD <10%
    • Dimming 50%-60%-70%-80%-90%-100%
    • Lamp CCF <1.6
    • Operating frequency low frequency
    • Environment temperature for full load operation 40℃
    • Enclosure temperature rise (Δt) ) 30℃
    • Ballast IP rated IP20
    • Humidity 90%
    • Dimensions 245 x 114 x 81mm
    • Weight 2.5Kg

    EMI suppression certified Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification No audible noise, no flicker

    Certificates and Test Reports:

    Other:

    Add to cart
  • Attis 200W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, vegetative and flowering growth periods of indoor-grown crops.

    The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 200W model producing 460 µmol/s PPF at 2.3 µmol/J efficacy (fixture efficiency) and ideal for a 0,8 x 0,8 m grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

    Add to cart
  • Attis 300W by Lumatek

    Specifikationer

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period. The Lumatek ATS series is a range of full spectrum LED grow lights featuring top bin LUMLED LEDs and dimmable Lumatek drivers. This light-weight fixture is available in 300W (1m2 area) and 200W (0.8m2 area) versions and is ideal as sole-source or supplemental grow lighting for propagation, cloning, vegetative and flowering growth periods of indoor-grown crops. The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration of canopy without hotspots and excessive heat. The innovative heat sink and use of passive natural convection has eliminated the need for a fan, reducing noise output and significantly increasing the life span of the fixture as it has no moving parts. The ATS is a highly efficient grow light fixture with the 300W model producing 690 µmol/s PPF at 2.3 µmol/J efficacy and ideal for a 1m2 grow area.

    Full Spectrum

    Lumatek LED grow light solutions use a blend of white, deep red & far red LEDs to produce a highly efficient light source calibrated to provide high intensity, stable and uniform output for optimal light absorption. Previous generations of LED grow lights used a mixture of royal blue and deep red LEDs to target chlorophyll absorption peaks. Whilst these solutions worked adequately they missed out important spectra for quality plant growth, lacked penetration through dense canopies and provided poor visibility for inspecting and maintaining grow rooms.

    Passive cooling

    Lumatek’s innovative design and advancement in LED technology has produced a high powered LED grow light with passive convection cooling. This fanless design means no moving parts so Lumatek LED fixtures are extremely robust with a long life span and operate silently.

     

    Read more
  • The Aurora is a state of the art 315W Ceramic Metal Halide (CMH/CDM/LEC) grow light fixture. This is an integrated all-in-one fixture combining a Lumatek controllable electronic ballast, compact hammertone reflector and 315W CMH lamp.

    The e-ballast has an option to be remotely controlled with a Lumatek digital control panel (sold separately) and is dimmable. When used with the controller the Aurora can be programmed with on/off times, simulated sunrise/sunset with a timed fade to and from full brightness and automatic dimming if grow room temperature parameters are exceeded.

    The Aurora’s reliable 315W CMH digital ballast has been successfully used in cultivation facilities around the word and uses square wave technology to efficiently fire and operate 315W Ceramic Metal Halide (also known as CMH/CDM/LEC) lamps.

    For safety this ballast uses full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression. Ballast has an LED indicator and is dimmable for optimum control.

    The Aurora”s 315W CMH pulse-start lamp has been engineered for use with Lumatek 315W CMH electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth.

    CMH technology creates high energy PAR/PPF levels with low heat at full spectrum which is closer to sunlight and produces healthier plant growth and larger yield. With a CRI (Colour Rendering Index) of >90%, CMH is perfect for growing high quality produce and essential oil extraction. The Aurora is supplied with a Lumatek 315-930 (3100K Agro) Ceramic Metal Halide lamp which is also available in 4200K Daylight spectrum format (Lumatek 315-942).

    The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.

    Specifications

    Certificate

    Electronic Dimmable Ballast for 315W CMH lamps

    • Voltage: 240V 50/60Hz
    • Input Current Max (A): 1.60A
    • Input power: 334W
    • Output power: 315W Power factor: >0.97
    • Efficiency: 92%
    • Voltage range: 185 to 275V
    • THD: <10%
    • CF: <1.6
    • Environment temperature for full load operation: 40℃
    • Enclosure temperature rise (Δt): 30℃
    • Ballast IP rated: IP20
    • Humidity: 90%
    • Operating frequency: low frequency square wave
    • No audible noise, no flicker
    • Full circuit protection; open/short circuit, over temperature, over/low voltage, end of lamp life/rectification
    • EMI suppression certified

    Lumatek 315W CMH (3100K) Grow Lamp

    • Power Voltage: 240V/50Hz
    • Lamp Power (W): 315
    • Lamp Current (A): 3.15
    • Rated Life (H): 14000
    • CCT(K): 3100K (Agro)
    • Initial Lumens (lm): 37000 (3100K)
    • Luminous Efficiency (lm/W): 118 (3100K)
    • PAR (micromols/sec): 650 (3100K)
    • Bulb: T38 Base: PGZX18
    Add to cart
  • LUMATEK Control Panel PLUS 2.0 (HID+LED)

    Specifikationer

    The LUMATEK Control Panel PLUS 2.0 (HID+LED) is a dual signal digital lighting controller that offers precise external control of your Lumatek lighting fixtures, drivers and ballasts. Using innovative technology, this controller smartly monitors your grow room temperatures, light timing & intensity automation, safety-controlled dimming and switching On/Off. Simply connect it to your Lumatek Controllable Fixtures, Drivers or Ballasts and easily regulate your grow room environment.

    Innovation:

    • Connectable with Lumatek Controllable HID ballasts & fixtures; 315W, 600W, 630W & 1000W
    • Connectable with Lumatek Controllable LED drivers & fixtures; 90W, 465W, 600W & 1000W.
    • Dual signal RS485 digital for HID and 0-10V analog protocol for LED.

    Intelligence:

    • Automate switching, timing, dimming and simulate sunrise and sunset periods.
    • Temperature-control dimming & switching for safety control
    • Automate light intensity and PPFD

    Horticulture Solution:

    • Control up to 400 HID ballasts or fixtures (200 ballasts per channel – Zone A & B)
    • Power: Adaptor 100 – 240V AC 50/60Hz – DC 5V/2A
    • Match HID Ballast: 315W, 600W, 630W, 1000W
    • Match LED Driver: 90W, 465W, 600W, 1000W
    • Power Dimming Range: 10% – 115%
    • Power Regulation Accuracy: 1%
    • Temperature-controlled Safety Dimming range: 0ºC-40ºC
    • Temperature-controlled Safety Switching range: 10ºC-50ºC
    • Sunrise and Sunset Duration: 0-30 min
    • Dimensions: 125mm x 80mm x 25mm

    Control panel for up to 400 HID ballasts or 100 LED drivers

    • Two channels (Zone A & Zone B)
    • Max number of ballasts/drivers per Zone: 200 (RS485) HID or 50 (0-10V) LED
    • Total number of ballast/drivers per controller: 400 (RS485) HID or 100 (0-10V) LED 24 Hr Light timing & switching
    • Temperature sensor monitoring and control
    • Dimming control (1% increments)
    • Safety and temperature control automation
    • Simulate sunrise and sunset to lessen plant stress
    • Light intensity automation

    Items included:

    • 1 x Lumatek Control Panel Plus 2.0
    • 1 x Power adaptor and cable
    • 2 x Temperature sensor 5m cable
    • 2 x HID control link cable 5m
    • 2 x LED control link cable
    Add to cart
  • This 5m long Control Link Cable is designed to daisy-chain your LUMATEK Controllable LED Fixtures allowing a stable and precise connection without any interference. Simply connect the M12 Self-locking male plug into the Signal Out LED structure output and the M12 Self-locking female plug into the Signal In LED structure input of the next fixture.

    See here how to use and set-up for the different versions

    Wire Gauge: UL 2464 3×22AWG 80℃ 300V VW-1
    Technical/Test data:

    • Withstand voltage between conductor and insulator is 800 VAC, 2mA, test time 60S, no breakdown or leakage current occurs
    • Temperature Resistance: 80℃
    • Working temperature: -20℃-105℃
    • Storage temperature: -25℃-105℃
    • IP65
    • Comply RoHS
    Add to cart
  • These two 5m long Extension Cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remote and away of the fixture. Allowing a stable and precise connection without any interference these product is composed by 2 elements:

    • 5m Extension Power Cable for LED driver
    • 5m Extension Dimming Cable

    See here how to use and set-up for the different versions

    – 5m Extension Power Cable for LED driver: M19-2 Self-locking male and female injection molding with 5m extension cable

    Wire Gauge: UL SJTW 2x16AWG 300V 105℃

    Technical/Test Data:

    • Withstand voltage between any two poles is 500 VAC, 2mA, test time 3S, no breakdown or leakage current occurs
    • The withstand voltage between outer cover and electrode is 500 VAC, 2mA, test time is 3S, no breakdown or leakage current occurs
    • Insulation Resistance:100MΩ@100V
    • Temperature Resistance:105℃
    • Working temperature: -20℃-105℃
    • Storage temperature: -25℃-105℃
    • IP65
    • Comply RoHS

    – 5m Extension Dimming Cable for LED driver: M19-2 Self-locking male and female injection molding with 5m extension cable

    Wire Gauge: UL 21996 3×22AWG 300V 105℃ VW-1

    Technical/Test Data:

    • Withstand voltage between any two poles is 500 VAC, 1mA, test time 3S, no breakdown or leakage current occurs
    • The withstand voltage between outer cover and electrode is 500 VAC, 1mA, test time is 3S, no breakdown or leakage current occurs
    • Insulation Resistance:100MΩ@100V
    • Temperature Resistance:105℃
    • Working temperature: -20℃-105℃
    • Storage temperature: -25℃-105℃
    • Comply RoHS
    Add to cart
  • Lumatek Zeus Range 600W LED

    Specifikationer

    The Lumatek Zeus 600W LED is a linear multi-light bar fixture producing PPF of 1380 µmol/s and a Photon Efficacy (fixture efficiency) of 2.3 µmol/J. With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period.

    The array of LEDs create a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents.

    The Zeus is built using high quality Lumatek drivers and top bin LEDs from Osram and Lumileds Philips generating a full-spectrum light source ideal for veg and flowering cycles.

    For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with six LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

    The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller featuring automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

    Universal Control Systems Compatibility
    Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

    Compared to regular open HPS/MH solutions the Zeus can achieve 30-40% less HVAC capacity.

    100W Standard LED bar only to be used with compatible Zeus 600W Standard Driver/Fixture.

    Read more
  • ZEUS 600W Pro LED by Lumatek

    The higher specification Lumatek Zeus 600W Pro LED is a linear multi-light bar fixture producing high PPF of 1620 µmol/s and a Photon Efficacy (fixture efficiency) of 2.7 µmol/J.

    With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) sufficient to provide single-source lighting for entire grow cycle from vegetative through flowering period.

    The array of LEDs create a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents.

    The Zeus is built using high quality Lumatek drivers and top bin LEDs from LUMLED and Osram generating a full-spectrum light source ideal for veg and flowering cycles.

    For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with six LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

    The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller featuring automated dimming, temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

    Universal Control Systems Compatibility
    Lumatek Zeus LED Fixtures can be fully controlled with either the Lumatek Digital Panel or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.

    Compared to regular open HPS/MH solutions the Zeus can achieve 30-40% less HVAC capacity. 100W Pro LED bar only to be used with compatible Zeus 600W Pro Driver/Fixture

    • Efficacy: 2.7 µmol/J
    • PPF: 1620 µmol/s
    • Input Voltage: 200-240V
    • Power Consumption: 600W
    • Footprint: 1.5×1.5m Waterproof: IP65
    • Lifetime: 60 000 Hrs
    • Light Distribution: 120°
    • Light Source: Osram & LUMLED
    • Diodes Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included) External
    • Control: With Lumatek Digital Panel
    • Weight: 13.5 Kg
    • Dimensions: 1091 x 1182.4 x 51.9 mm
    • Spectrum: Full Spectrum F
    • BTU (With Driver Attached): 2115 BTUs/h
    • BTU (With Driver Remote): 2047 BTUs/h

    Items Included:

    • 6 x Lumatek 100W Full-Spectrum Magnet Light Bars
    • 1 x Lumatek 600W Driver with Connecting Cables
    • 1 x LED Structure with Connecting Cables
    • 1 x 0-10V Light Dimmer + Velcro
    • 2 x Metal Cable Hangers
    • 1 x Manual

    Features

    • Very high efficacy 2.7 µmol/s/J
    • High PPF output for high intensity 1620 µmol/s
    • High quality Lumatek LED drivers
    • Top bin LEDs
    • Balanced full spectrum
    • External control with Lumatek Control Panel
    • Replaceable 100W magnet light bars
    • Fully Dimmable
    • User friendly Plug & Play Assembling
    • Detachable driver for remote use

    Manuals

    Read more
Wishlist 0
Open wishlist page Continue shopping